Airbus A350 maintenance programs face two updates after the European Union Aviation Safety Agency issued airworthiness directives on Nov. 19 for the A350-900 and A350-1000. Both directives take effect Dec. 3 and apply to all manufacturer serial numbers of the two models identified in the documents.
The first directive updates limits on parts subject to safe-life requirements. The second updates maintenance tasks and intervals for aircraft systems and equipment. Each requires operators to bring the applicable changes into their approved maintenance programs while following its own compliance instructions.
Table of Contents
What the Airbus A350 maintenance directives cover
EASA directive 2026-0221 adopts Revision 10 of Part 1 of the A350 Airworthiness Limitations Section, which covers safe-life items. The directive supersedes a 2024 EASA directive. It requires operators to follow applicable life limits and to incorporate those limitations into their approved programs.
EASA directive 2026-0222 adopts Revision 11 of Part 4 of the same Airbus publication. That section covers scheduled maintenance of systems and equipment. The new directive supersedes a 2025 order and brings additional or more restrictive requirements into the program where they apply to the aircraft’s model and configuration.
The distinction is important for maintenance planners. A safe-life limit sets a point by which the applicable item reaches the end of its approved life. A scheduled check is a task that an operator has to perform at a specified threshold or interval. The two documents address these obligations separately, even though they cover the same A350 models and share an effective date.
When operators must act
The directives give operators 12 months from the effective date to revise their approved aircraft maintenance programs. They also specify that tasks and limitations must be followed within the applicable thresholds and intervals. A maintenance-program paperwork deadline does not delay the deadline for an individual task that comes due earlier.
Both directives also address aircraft whose maintenance programs already reflect an earlier revision of the Airbus limitations. EASA permits operators to carry forward qualifying work under those programs while incorporating the new or stricter requirements in accordance with the applicable compliance instructions.
The system-equipment directive further requires corrective action before the next flight when the applicable task finds a discrepancy. If existing Airbus documentation cannot address the discrepancy, operators must seek approved Airbus instructions. That applies when a check finds a problem and does not put every A350 on the ground when the directive takes effect.
How the final rules followed consultation
The directives follow two proposals EASA published on Oct. 20. The consultation periods ended Nov. 17, and the agency records no comments on either proposal. The final documents set the Dec. 3 effective date and identify the Airbus revisions that operators need to consult.
The presence of a new requirement does not mean the same work falls due on every aircraft on the same date. The applicable configuration, task and interval determine what a maintenance planner schedules for an individual aircraft. Those details are set out in the referenced Airbus airworthiness limitations.
TAD previously reported on A350 component support, a separate industrial effort that involved access to components and repair capacity. In this case the relevant change is to the list of mandatory maintenance work and its timing, regardless of an operator’s choice of service provider.
FAQ: Airbus A350 maintenance
Which models do the Airbus A350 maintenance directives cover?
Both cover Airbus A350-941 and A350-1041 aircraft, the designations listed for the A350-900 and A350-1000.
When do the directives take effect?
Both directives take effect Dec. 3, 2026.
Do both directives amend the same part of the Airbus manual?
No. One concerns Part 1 safe-life limitations and the other concerns Part 4 system-equipment maintenance requirements.
Looking Ahead
The first common milestone is the Dec. 3 effective date. Operators will then incorporate the applicable revisions into their approved programs and carry out the individual tasks at the required thresholds.



